FAQ

BBT Training Australia

Frequently Asked Questions 2008

RTA Traffic Control

Q. What Traffic Control Courses are on offer at BBT Training Australia?

Traffic Controller BLUE  ( traffic Control using the Stop Slow Bat)

To enroll in this course you will require :

·         Adequate reading and writing ability

·         Work Cover NSW Construction Induction Card (GreenCard)

·         Hold or have held a NSW P2 drivers Licence OR a previous Traffic Control Ticket ( within the last two years)

Apply Traffic Control Plans YELLOW

To enroll in this course you will require :

·         Adequate reading and writing ability

·         Work Cover NSW Construction Induction Card (GreenCard)

Select and Modify Traffic Control Plans   RED

To enroll in this course you will require :

·         Adequate reading, writing and problem solving skills

·         Have held  a Traffic Controller  or Apply traffic Controller Card for 12 months

·         Relevant  Industry experience that is certified by an employer or relevant documentation  ie Site JSA , SWMS or work instructions  OR a letter from your employer stating your experience

Design and Inspect Traffic Control Plans  ORANGE

To enroll in this course you will require :

·         Adequate reading, writing and problem solving skills

·         Completion of the RED Traffic Control ( Select and Modify Traffic Control Plans )

·         Experience in selecting and modifying TCP in the workplace

Q.  How Often does BBT Training Australia Conduct Training ?

Traffic Controller BLUE  ( traffic Control using the Stop Slow Bat)   

 This course is conducted every  fortnight  on  Tuesday  

NOTE: see our website for scheduled dates and online enrolment   www.bbttraining.com.au

Apply Traffic Control Plans YELLOW

This course is conducted on request to BBT Training

NOTE: see our website for scheduled dates and online enrolment   www.bbttraining.com.au

Select and Modify Traffic Control Plans   RED

This course is conducted every  Month  on  Monday and Tuesday  

NOTE: see our website for scheduled dates and online enrolment   www.bbttraining.com.au

Design and Inspect Traffic Control Plans  ORANGE

This course is conducted on demand please send your requirements to BBT Training . We will notify you of course  availability  

NOTE: see our website for scheduled dates and online enrolment   www.bbttraining.com.au

Q. WHAT SHOULD I DO IF I HAVE NOT RECEIVED MY TICKET?

Contact  BBT Training Australia  1300136528

Q. WHAT IF MY TICKET HAS A MISTAKE?

Contact  BBT Training Australia  1300136528?

1. Fill out a Statutory Declaration (available from Australia Post), with the following details:

·          your name, address and date of birth

·          your ticket number, training date and training provider (if possible)

·          the reason why you need a replacement ticket

·          your signature (witnessed by a Justice of the Peace)

·          the Justice of the Peace’s signature and JP number.

2. Send the Statutory Declaration, with a cheque or money order for $25.00 (per card) made out to:

Roads and Traffic Authority (not ‘RTA’) to:

RTA Traffic Control Training Unit

PO Box 3035

PARRAMATTA NSW 2124

3. Your ticket will be reprinted and sent back to you by mail

A Statutory Declaration form can be obtained at BBT Training Australia

Heavy Vehicle Training

Q. How do I get a HR or HC driver Licence in NSW?

BBT Training Australia offers Heavy Vehicle Training  HR and HC  under the RTA NSW CBA system our instructors are authorized and qualified by the RTA to conduct Competency Based Assessment (CBA). To initiate this process the following procedure applies :

1.      Attend a RTA NSW Motor Registry and apply for and complete you  HR or HC Driver Knowledge Test and obtain your CBA Heavy Vehicle Log book for the license class required . NOTE: you should study for this assessment on the RTA website  http://www.rta.nsw.gov.au/licensing/gettingalicence/gettingaheavyvehiclelicence/rta_heavy_vehicle_dt.html

2.      After obtaining your CBA Log book please send and online enrolment to BBT Training Australia, we will respond in most case within two hours to confirm  available dates and times and to make a booking

3.      On the Day of your training you will be required to bring your CBA Heavy Vehicle Logbook and your current driver license

4.      You will then commence your Heavy Vehicle Training experience at BBT Training

Q. Does BBT Training Australia conduct the ONE Day driver training courses ?

A.   NO , At BBT Training Australia our focus is giving you the best ,safest and most effective Heavy Vehicle Driver Training available , Our experience is that applying specific time frames to your training puts unnecessary and an warranted pressure on the process and applicants .To  provide a safe and enjoyable driver training BBT Training Australia employs the following procedure:

1.      BBT Training Australia will in most cases keep training sessions to a maximum of 4 Hours per day (LR MR exempt)

2.      BBT Training Australia instructors are there to assist you and have your best interests in mind and may tailor your sessions to suit your level of competence

Q. What kind of trucks does BBT Training have?

Our trucks are as follows :

HR -   Hino FM 9 speed constant mesh gear box (crash Box)

HC – Hino FM 9 speed constant mesh gear box (crash Box)Truck and dog

MR - Izusu  FRR500 6 speed syncro gear box

Forklift Training

Q. How long does the BBT Training Australia forklift course run for?

A. BBT Conducts our Forklift course over three (3) days . This will enable you(trainee) to learn all aspects of the forklift operation and to gain valuable experience in forklift operations that will allow you to commence work on a forklift at the completion of the training course . BBT Training Australia aim to  equip trainees with job ready skills so they may be safe and productive in the workforce at the completion of training

Q. What does the Forklift course include?

A. BBT Training Australia’ forklift course includes

·         Two days Theory and practical training

·         Work Cover NSW assessment  LF

·         Supply of training manuals

·         Tea , coffee  and water

·         A safe, comfortable and accessible  training venue

Q. Does the fee include the Work Cover Certificate fee ?

A. NO , The current requirement of Work Cover NSW  requires applicants to present to an Australia Post  Post Office and lodge this application in person . BBT Training will make you aware of this process at the completion of you training

Dogging Training

Q. How long does the BBT Training Australia Dogging  course run for ?

A.  BBT Training conducts the Dogging course over 5 Days, in this time you will gain valuable experience in setting up and working with our Mobile crane, that is on site for the duration of the course (schedule permitting) . We have a strong focus on safety and productivity and as such we will instruct you to :

·         Conduct workplace communications

·         Implement Risk Management in the workplace

·         Complete onsite Hazard and Risk assessments (JSA)

Q. What does the Dogging course include ?

A. BBT Training Australia’ Dogging  course includes

·         Four  days Theory and practical training

·         Work Cover NSW assessment  DG

·         Supply of training manuals

·         Tea , coffee  and Water  

·         A safe, comfortable and accessible  training venue

·         All Crane Hire , Tools and equipment

Q. Does the fee include the Work Cover Certificate fee ?

A. NO , The current requirement of Work Cover NSW  requires applicants to present to an Australia Post  Post Office and lodge this application in person . BBT Training will make you aware of this process at the completion of you training .

Q . What are the pre requisites  for the Dogging course ?

A. The Dogging course requires a fair understanding of mathematical procedures and basic literacy and numeracy skills . During your course you will need to calculate some basic maths  equations  and read and interpret written information .

Dogging is classified by Work  Cover as Hig Risk Construction Work and as such you will require the Work Cover NSW OHS Induction for Construction Certificate (Green card )  

Basic  Rigging Training

Q. How long does the BBT Training Australia Basic Rigging course run for ?

A.  BBT Training conducts the Basic Rigging course over 4Days, in this time you will gain valuable experience in setting up and working with our Mobile crane, that is on site for the duration of the course (schedule permitting) , Erecting structural Steel at height , working with safety harness and fall arrest systems

 We have a strong focus on safety and productivity and as such we will instruct you to :

·         Conduct workplace communications

·         Implement Risk Management in the workplace

·         Complete onsite Hazard and Risk assessments (JSA)

Q. What does the Basic Rigging course include ?

A. BBT Training Australia’ Basic Rigging course includes

·         Three  days Theory and practical training

·         Work Cover NSW assessment  RB

·         Supply of training manuals

·         Tea , coffee  and water

         A safe, comfortable and accessible  training venue

·         All Crane Hire , Tools and equipment

Q. Does the fee include the Work Cover Certificate fee ?

A. NO , The current requirement of Work Cover NSW  requires applicants to present to an Australia Post  Post Office and lodge this application in person . BBT Training will make you aware of this process at the completion of you training .

Q . What are the pre requisites  for the Basic Rigging course ?

A. The Basic Rigging course requires a fair understanding of mathematical procedures and basic literacy and numeracy skills . During your course you will need to calculate some basic maths  equations  and read and interpret written information .

You must have passed the Dogging course to commence the Basic Rigging course

Basic Rigging is classified by Work  Cover as Construction Work and as such you will require the Work Cover NSW OHS Induction for Construction Certificate (Green card )